Daewoo Propane Forklifts San Antonio

Change a Propane Tank

Forklifts fueled by propane are common in warehouse settings. These forklifts have a propane mount situated behind the operator. These tanks need to be replaced periodically since they have limited lifespans. Operators of forklifts must always utilize care when handling propane tanks. Compressed gases are hazardous, particularly because the gas is flammable. Use caution when replacing and removing propane tank to prevent being injured.



1 If there is a need to replace the propane tank, the first step is to stop the lift truck, then turn off the tank valve. The forklift must be left on until the engine dies. This procedure burns off the gas inside the transfer hose which connects the engine and the tank. Before taking the second steps, wear the proper safety equipment, such as insulated gloves made of either leather or neoprene. It is vital for you to protect your skin from touching the compressed gas, which is extremely cold.

2 Disconnect the hose from the tank and take the holding straps off to remove the tank. When you put in a new tank, reattach the holding straps and reconnect the hose at the valve of the tank by tightening the nut.

3 You could check for leaks by applying soapy water to the valve and slightly opening it. Leaking gas will cause bubbles to foam around the value. If this happens, inspect the valve area and the connection hose at the nut. The connecting nut should be re-tightened if you detect any leaks around the valve area, and after that perform the leak inspection procedure again. Persistent leaks mean that the nut and connecting hose would have to be replaced. Nevertheless, if replacing the nut and hose still does not stop the leak, the tank will have to be replaced.

4 Open the valve all the way to enable the gas to fill the connecting hose. Then you can start the forklift and resume operating.

• Jungheinrich Order Picker Forklifts San Antonio
  For the utilization of forklifts, there are some safety and health rules governing their use. Lift trucks are big industrial machinery which can be dangerous and have to be handled with safety in mind. The... More
• Toyota Stand Up Forklift San Antonio
  Aisle Types Lift trucks are classified due to the types of aisles they have been designed to operate in. Narrow Aisle and Wide Aisle lift trucks are designed to turn in the aisle, whereas Very... More
• Caterpillar Lift Trucks San Antonio
  How to lessen the cost of damage to fork lift trucks There are several common reasons for forklift truck damage, no matter what the workplace might be. Instances of damage can be really pricey. Costs... More
• Terex Empty Container Handlers San Antonio
  Two of the important features of the Fantuzzi empty container handlers are low running expenses and excellent productivity. During 1974, Fantuzzi made their very first empty handling truck. Since their emergence on the market, Fantuzzi... More
• Hyundai Reach Forklift San Antonio
  Reach Forklifts In most distribution centers or warehouse settings, overall space is usually limited. If you could get a machine to use in smaller spaces and aisles, the more storage space a company would be... More